All About 192.168.1.1

192.168.1.1 is the default configuration IP address for common routers. The IP address 192.168.1.1 is assigned by default to many different wireless routers.It can be easily changed through a router panel, normally used by Linksys, Netgear, Tplink, Huawei and some other broadband routers.

This address is private, which means that it is not visible to the public even when connected to the Internet. No one can connect to 192.168.1.1 from outside of the local home or business network without special software or hardware.The private networking system makes the combination of many networks into one possible and thereby makes the Internet a reality.

A network has internet protocol addresses for the equipment attached to the network, and most routers reserve the address 192.168.1.1 on a network. To set up a router, you have to make sure a few basic configuration settings are working, and remember an address named 192.168.1.1, which will come in handy.

A router will assign a unique internet protocol number to devices on the network via a process called the Dynamic Host Configuration Protocol or DHCP. The DHCP screen on the router, accessed from the 192.168.1.1 web address, can also show wireless devices on the network that do not belong in the network.

Again, the internet protocol number for the router is often 192.168.l.l. Once inside the command prompt, you will want to enter "ipconfig/all" to see the 192.168.l.l address or whichever address is listed as your default gateway. The user should open a web browser and point it to http://192.168.l.l.

You will be asked to enter in a username and password, which is usually a username called "admin", and a password called "password". After logging in, the user can change the router's configuration, you can change any setting on the router that you would like.

Tip: Outside access to a wireless network is a risk for every network administrator. Wise administrators use a signal encryption and a password requirement for wireless access.

Know the IP number and Mac

The aim of these programs is to detect all devices connected to that network and even reveal their MAC addresses -identificador corresponds uniquely to a card or device network- and device model. It also offers the opportunity to limit access to that particular device.

The problem is that it detects the intruder only at the time in which analysis is performed, whereby if the "thief" WiFi is not connected now can not find out until we agree.

However, to know if they are connected at any given time, access the router. To this we must introduce generally 192.168.0.1 or 192.168.1.1. in the browser or go to Finder Windows (Start / search engine) and type cmd.exe. a black screen on which we write "ipconfig / all" and, once this operation will appear, "Wireless LAN Connection" and then "Physical Address."

Thus, the user can know the encryption system. It is very common that provide internet services opt for the WEP system, considered the most insecure and less desirable.

Parasite neighbor on your Wi-Fi? Take a simple test

Have you ever wondered why your Internet connection from time to time to slow down or the connection is suddenly interrupted?

If in your home or office using a wireless connection using Wi-Fi router failures mentioned above can be caused by incorrect configuration of either the device itself or someone on your Internet connection parasites therefore uses it without your knowledge.

If you suspect that someone uses your Internet connection, there is a way how to not only detect, but even "cut" from your network once and for all. Plus, it requires only two steps!

Step 1: Log in to your router

To find out what devices are currently connected to your network, you need to log in to your router. This is done by entering the IP address of your router in the browser, just as if you were placing the web page address. Two largest producers in the world routers - Cisco and Linksys - to set aside address "192.168.1.1". But if you're using a device from another manufacturer, the IP address of your router can be found in the attached either manually or at techspot.com.

After opening addresses you will be prompted for a username and password. That you received together with routers, but you may have changed it during installation. Often, however, simply enter basic setup - that is "admin" as the username and "password" as a password. In any case, however, these settings if you need to find your router.
After successfully logging in menu scroll to "DHCP Client List" or "Attached Devices" (attached devices). You'll see the MAC addresses of devices that are currently connected to your router. It does not refer only to computers but also mobile phones, tablets, TVs, printers and the like. A blacklist more devices than that you know is you certainly connected to someone else in addition.

This is even easier?

For Microsoft Windows users, we have good news. Fortunately, because there is a Wireless Network Watcher, which is much simpler, and that will run after you to scan your network and will tell you which devices are connected to it. Again, if the list of more devices than that you know you have unwanted company.

Step 2: Get rid of the uninvited guests

The first thing you can do to get rid of the "parasitic" devices, change the password for your Internet connection. This can be done right in the interface to manage Wi-Fi router to which you have logged in the first step. Since each manufacturer and even almost every router model is named differently these settings, it is not possible to give specific instructions on how to do it. At any rate, to be found in that part of the setup, which is a safety connection. Oftentimes, this option can be found in the "Wireless Settings" or "Advanced Settings".

The fact that you are right, you will know by the fact that you will see a menu of options to choose WPA2 or WPA.

Choose a safer choice WPA2 and enter a really good password - it is recommended to use a combination of uppercase and lowercase letters, add some numbers and perfect the "spice up" any special characters like parentheses, quotation marks, at sign, dashes, stars, etc. (more than enough two such characters). And of course, you must remember this password.

Then save your settings and restart your router.

This is a very quick and effective solution if you have to line their uninvited guests. It should, however, think about how to connect to your ever got. Either Or your network is password-protected (worst-case) or were protected, but not enough, as the third person was able to guess the password. It is therefore important to choose a password really sufficient quality and regularly varied.

Parasites on foreign Wi-Fi is a crime

However, if you had your connection password-protected and yet someone to join, you can also consider filing a criminal complaint. Our legislation such conduct outlaws and the criminal.

Specifically, this issue is devoted Act. 300/2005 Z.z. (Penal Code) in its § 247 also specifies criminal penalties, according to which the attacker can remain without the Internet and behind bars for six months to three years.

Access your Box (192.168.1.1) to administer

To access your box more often we must return its IP address (192.168.1.1 or 192.168.0.1) and your password (admin / password). Once connected you can then administer your network (change your password wifi, redirect ports, ...).

LiveBox (Orange)

To access your LiveBox go to this address http://192.168.1.1 (or http: // livebox)

Log then with these credentials:

Username: admin

Default Password: the first eight characters (in UPPERCASE) of the security key (wireless key) that is on the label of your Livebox.

NeufBox (SFR Box)

To access your NeufBox go to this address http://192.168.1.1

After opening the page enter the password.

Username: admin

Default Password: the wifi key located on the box

BBox (Bouygues)

To access your BBox visit this http://192.168.1.254 address or http: //gestionbbox.lan

After opening the page enter the password.

Username: admin

Default password: admin

FreeBox (Free)

On older FreeBox it will do so directly from the site Free https://subscribe.free.fr/login/ returning your login Free

On the new Freebox you type this address http://mafreebox.freebox.fr/ and enter a password of your choice at the first connection (more info here)

IREL Numericable

To access your NeufBox go to this address http://192.168.0.1

After opening the page enter the password.

Username: admin

Default Password: password

AliceBox (Alice)

Alice box to administer your appointments in your subscriber space
http://espace-abonne.aliceadsl.fr/ and enter your password

IP address error

Typing wrong address of your box, your browser will convert your typing to search (this may be what brought you here), here are the mistakes to avoid:
IP addresses can only be composed of numbers so forget the o, i or L that would kind of IP addresses: 192.168.l.l, 192.168.O.1 or 192.168.l.l

Also avoid other punctuation marks that point 192,168,1,1 192-168-1-1 192 168 1 1 www.192.168.1.1 ...

Remember to put the http: // before the address on Internet Explorer (not required for Firefox or Chrome). For example http://192.168.1.1

On error see also this article Identify your local IP address and your BOX.

How to Manage Your IP Address & Make Your Wireless Router Safe

Manage Your IP Address

Manage IP Clashing

IP clashing occurs when one or more routers tries to use the same IP address internally or externally. It's worth noting that you should always change the internal IP of any router from 192.168.1.1 to something like 192.168.2.1. Depending upon your network setup, you may have to deal with multiple external Ips.

It's imperative that your routers know how to handle this situation, as it can potentially lead to IP clashing. If you notice this issue, one way to fix it is by daisy chaining your routers together. You will plug the first router into your external connection, then the second into the first router.

Renew Regularly

If you encounter problems with any given IP address and you have a dynamic IP, then correcting them may be as simple as releasing/renewing your IP during the right hours of the day.


Check Your IP Regularly

The internal IP is 192.168.1.1. The external one will by the IP address that the rest of the world sees as yours. When in doubt, check your IP regularly. Most routers that utilize the address 192.168.1.1 will show the internal and external Ips associated with it.


Consider Static IPs

They can significantly reduce the variety of IP-related problems you might face. One solution to managing your IP address is to consider utilizing static addresses in lieu of dynamic ones.


Check Your IP Regularly

The internal IP is 192.168.1.1. The external one will by the IP address that the rest of the world sees as yours. Most routers that utilize the address 192.168.1.1 will show the internal and external Ips associated with it. When in doubt, check your IP regularly.


Make Your Wireless Router Safe

Check The Range

Many people have their router on one side or another, and this allows other people to catch the signal during the day. Use 192.168.l.l to check your range. If you set up your router in the middle of the house, you will not have your router broadcasting far outside the home.


Passwords

You cannot set up a wireless router without using a password because anyone could use that signal for no good. Go into 192.168.l.l to change the password. You need to password protect your wireless signal.


Get A Warranty

When something bad happens to the router, you can often fall back on the warranty for help. You need to make sure you have the warranty for your router.


Passwords

Go into 192.168.1.1 to change the password. You cannot set up a wireless router without using a password because anyone could use that signal for no good. You need to password protect your wireless signal.


Turn It Off

When you are out of town for several days, it is best for you to turn off the router. This prevents bad things from happening when you are not around to see them.


Each one will help you make sure that your home network is safe whether you are there or not, and you can use 192.168.1.1 to check your settings. When you are trying to secure your wireless router, it is best to follow the five tips listed below.